Index > Welding
     
Spare Tire Carrier
Posted by Ron Schofield on 2009/03/11 21:26:54 (610 reads)
Welding

The original coupes had had a spare tire mounted in the rear of the car under the hatch.





I decided that I would make one for myCoupe. After doing some research I designed my version on CAD.



To download a copy of the plans for this spare tire carrier. Right mouse click on the link below save.
SPTIRE.DXF

The materials used were 3/4 inch .065 steel tube. The tire carrier was designed to take a tire that is no larger than 26 inches in diameter. The plans can be changed to accommodate a larger or smaller tire.

MORE TO FOLLOW

  0   Article ID : 26
Read More...  |  Comments?