Author : Ron Schofield
Article ID : 26
Audience : Default
Version 1.00.04
Published Date: 2009/03/11 21:26:54
Reads : 615
The original coupes had had a spare tire mounted in the rear of the car under the hatch.
I decided that I would make one for myCoupe. After doing some research I designed my version on CAD.
To download a copy of the plans for this spare tire carrier. Right mouse click on the link below save.
SPTIRE.DXF
The materials used were 3/4 inch .065 steel tube. The tire carrier was designed to take a tire that is no larger than 26 inches in diameter. The plans can be changed to accommodate a larger or smaller tire.
MORE TO FOLLOW
| 
The comments are owned by the poster. We aren't responsible for their content.
